Dry Friction: 

.021 to .480 depending on
the grade of bearing composite

Operating and Maximum Temperature:

-42° F to +550° F, 815° F (short term)

Thermal Expansion:

Very low

Bonded Lining Thickness Available:

.0007-.0018”, .001-0028”, .002-.0044”, .004-0066”, .006-009”, .008-.012"

Tolerances of the Applied Bonded Lining:

+/- .0002", +/- .0003", +/-.0005". Note: wider tolerances lower processing costs

PV Capabilities:

Up to 53,000

V Rating:

140-2250 rpm dry friction

Electrical Insulation or Conductivity:

Available

Water Absorption:

.04 to .26

Chemical Resistance

Wide range including acids, bases, solvents

FDA/USDA/MEDICAL:

Formulations available

Radiation Resistant Grades

Available

Colors:

Limited colors are available

Fluid Compatibility

Wide range

Bondable Substrates:

Metals, Sintered metals Ceramics. Lower temperature metals like zinc and Plastics, and Composites. (Temperature stability of the substrate is the limiting factor. Please check with our technical department.)